Vintage Jello Tins and Molding Candle Holder

I'm still working on getting unpacked and organized from the Vintage Market that my mom  and I shared a booth at this past Saturday. It was such a beautiful day and a lot of people came out to enjoy it and do some shopping. We were super busy all day and very thankful for each person who took time to browse our booth. Click here to see our booth. We worked on numerous projects to get ready for the market and this is one of them.

It is a candle holder made from a piece of salvaged wood molding and vintage jello tins.

Horseshoes and a Chunk of Wood get a New Life

Remember a while back I made a beautiful winter wreath from an old horse harness? You can check it out here.   I used horseshoes as part of the decoration for the wreath and I had a few extras.   I also had a rescued chunk of rough sawn wood, that I saved from our burn pile.   I knew that I wanted to make the wood piece into a candle holder, but the idea to add the horseshoes came when I laid the chunk of wood on the counter in my workshop next to the box of extra horseshoes.  

 

Tiered Caddy from Baking Pans and Wood Candle Holders

I've been seeing tiered caddies online for quite some time and I finally made one!  

 

Upcycled Rustic Pumpkin Candle Holder

Can you recognize what this candle holder was in a previous life?  

  Maybe if I show it to you upside down?

 

  Now just imagine it without paint and with a screw sticking out of the top about 2 inches.  Have you figured it out yet?

 

  It was a foot that screws into the bottom of a chair.   (I apologize that I do not have any before pictures)   I upcycled all four of the feet the same way, creating two sets of pumpkin candle holders.   Now onto how these feet became pumpkin candle holders. The screws were removed with pliers and then they were turned over so that the top was now the bottom. Using a drill bit that would fit the size of a votive candle holder, I drilled a hole about 1 inch deep in each of the four feet.  

  They were natural raw wood and didn't really need any prepping for paint, so I started painting by rubbing acrylic craft paint on them with a t-shirt scrap rag. The bottom color is terra cotta and the top is forrest green.  

 

 

The candle holders were looking a little plain at this point.   I wanted to add something to create the curly tendrils that natural pumpkins have. Rusty wire seemed to be a great rustic option and I already had some on hand! I cut four pieces of wire long enough to wrap around the "pumpkins" and have extra to create the curly part with. I did this by wrapping the ends of the wire around a pencil and stretching the curls out.   They were still looking kindof plain, so my next rustic choice was raffia. I cut a few strands to fit around the top of each one and just tied them in a bow.  

  Those additions were just enough to give the candle holders some charm.

 

 

I kept a pair to use in our cabin and the other pair went into my Etsy shop.

 

You'll probably never look at chair feet the same now.

 

 

'til next time,

   

Linking to: 

Craftberrybush, Farmhouseporch, The Pin Junkie, 52mantels, A Night Owl Blog, Shabbynest, Tatertots and Jello, Six Sisters Stuff, Funky Junk Interiors, Its Overflowing, Uncommon Designs, Home Stories AtoZ, Cherished Bliss, Crafts a la mode, A Peek into my Paradise, A Stroll Thru Life,
Knick of Time Interiors, Love Grows Wild, Your Home Based Mom, The Hankful House,

The Shabby Creek Cottage, Cozy Little House, My Repurposed Life, The Best of DIY

 

 

Quick Vintage Pie Tin and Wood Spool Makeover

I just love the combination of metal with wood.

I have used vintage pie tins and old wooden textile spools in our cabin for decor.

The pie tins are hung on the rafter beam above the logs in our kitchen and the spools are used as pillar candle holders on our mantle.

I had one pan and a couple of textile spools I wasn't using so I decided to make them into a pedestal dish.

 

 

 

In order to stabilize the pedestal more I added a round wood base to the bottom of the spool. This piece was another leftover from a glass dome that had been broken.

 

 

 

 

To securely attach the pieces together my husband helped me drill a hole in the center of the wood base the same size as the hole running through the center of the spool. We slid a wood dowel through the spool and into the base using wood glue to secure it. Clamped it for the night and walked away. The next day we drilled a small hole in the center of the pie tin and used a nail to secure it into the wood dowel in the center of the spool. We also added a little more glue between the tin and spool.

 

 

 

 

As you can see, the tin has great graphics and the nailhead barely shows in the middle.

 

I've used this to display handmade soaps...

 

 

... it could be used as a fruit bowl, candle holder, or add a glass dome to it to use as a dessert stand or make a few in different heights to add some interest to a food buffet at your next party!

 

What would you use it for?

 

 

 

'til next time,

Adina

 

 

 

Linking to:

 

debbie-debbiedoos/pinterest-blitz-10